The Intel® SSD Toolbox has reached End of Life and is no longer available. The information below is for reference only, please see the following for more information:
Secure Erase functionality on SATA drives is supported on Windows 7* systems only, functionality is blocked by later Windows* versions.
If a Security Freeze Lock as been detected on the SATA drive in Intel SSD Tools, the UEFI/BIOS recognized the Intel® Solid State Drive (Intel® SSD) as plugged in when you started the system.
To remove the Security Freeze Lock state and continue with the Secure Erase process:
- Remove the SATA power cable from the drive and quickly reconnect it while the Intel® SSD Toolbox is running. Do this quickly so that the system recognizes the Intel SSD. Depending on your system configuration, you may need to remove the Intel SSD from the system.
- Unplug and plug in the SSD. Click OK. The Intel SSD Toolbox rescans the system for the Intel SSD.
- Once the drive is detected, continue with the Secure Erase. If the Security warning message displays again, repeat the power-cycling process. Quickly remove and reconnect the SATA power cable.
If the Intel SSD is not detected:
- Click OK on the Selected Drive Not Found message. The Intel SSD Toolbox home screen displays and scans the system.
- When it detects the Intel SSD, it displays on the Intel SSD Toolbox home screen. Click the Intel SSD and then click Secure Erase.
If the Intel SSD doesn't display on the Intel SSD Toolbox home screen:
- Click Start, right-click Computer, and click Manage on Windows 7.
- Click OK when you see the User Account Control message.
- Click Device Manager, right-click Disk drives, and click Scan for hardware changes.
- After scanning the system, go to the Intel SSD Toolbox home screen. Click Refresh.
- Try the Secure Erase procedure again.
If you still see the Security Freeze Lock message, we recommend running Secure Erase from a drive utility with Secure Erase.
|Intel® Solid State Drive Community|
|Intel Customer Support|