Article ID: 000033003 Content Type: Install & Setup Last Reviewed: 06/17/2022

How to Change the Boot Mode (UEFI/Legacy) on Intel® Server Boards

BUILT IN - ARTICLE INTRO SECOND COMPONENT
Summary

Steps to change the boot mode (UEFI/Legacy) on Intel® Server Boards and Intel® Server Systems

Description

This shows how to change the boot mode (UEFI/Legacy) on Intel® Server Boards.

Resolution

Follow the steps below to change the boot mode:

  1. Power on system.
  2. Press F2 when prompted to enter BIOS menu.
  3. Navigate to Boot Maintenance Manager -> Advanced Boot Options -> Boot Mode.
  4. Select the desired mode: UEFI or Legacy.
  5. Press F10 then press Y to Save Changes and Exit, the system will save the changes and reboot.
NoteIf the system already has an operating system (OS) installed, you will need to re-install the OS after changing boot mode.

Related Products

This article applies to 155 products

Intel® Server Board S2600STK
Intel® Server Board S2600STS
Intel® Compute Module HNS2600BPB
Intel® Compute Module HNS2600BPB24
Intel® Compute Module HNS2600BPB24R
Intel® Compute Module HNS2600BPBLC
Intel® Compute Module HNS2600BPBLC24
Intel® Compute Module HNS2600BPBLC24R
Intel® Compute Module HNS2600BPBLCR
Intel® Compute Module HNS2600BPQ
Intel® Compute Module HNS2600BPQ24
Intel® Compute Module HNS2600BPQ24R
Intel® Compute Module HNS2600BPQR
Intel® Compute Module HNS2600BPS
Intel® Compute Module HNS2600BPS24
Intel® Compute Module HNS2600BPS24R
Intel® Compute Module HNS2600BPSR

Disclaimer

1

All postings and use of the content on this site are subject to Intel.com Terms of Use.