Article ID: 000038385 Content Type: Install & Setup Last Reviewed: 07/06/2021

How to Access the RAID BIOS During POST for the Tri-Mode Intel® RAID Controllers


Steps to configure Tri-Mode Intel® RAID Controllers in pre-boot environment


There is no prompt during system POST to access/open the RAID BIOS Option ROM configuration utility.


Follow the steps below to configure the Tri-Mode Intel® RAID Controllers in pre-boot environment:


Your system must be configured in UEFI boot mode. There is no built-in configuration utility for the Tri-Mode controllers when the system is configured for legacy boot mode.

  1. Boot the system.
  2. Press the F2 key to enter the BIOS setup.
  3. Navigate to Advanced -> PCI Configuration -> UEFI Option ROM Control.
  4. Under Storage Controller, select your Tri-Mode Intel® RAID Controller.



All postings and use of the content on this site are subject to Terms of Use.