Article ID: 000090611 Content Type: Maintenance & Performance Last Reviewed: 04/29/2022

How to Recover Intel® NUC BIOS Using the Power Button Menu

BUILT IN - ARTICLE INTRO SECOND COMPONENT
Summary

Steps to recover an Intel® NUC's BIOS after failed upgrade, using Power Button.

Description

The Intel® NUC fails to boot after attempting a BIOS update.

Resolution

In the unlikely event that a BIOS update is interrupted, it's possible the BIOS may be left in an unusable state. Please follow the instructions and/or watch the video below.

WARNING: This process is intended to be performed by a trained technician.

  1. Download the Recovery BIOS (.bio) file. Example:

    Availble downloads

  2. Copy the recovery file (*.bio) to a USB device.
  3. Plug the device into a USB port of the target computer when it's turned off.
  4. Press and hold the power button down for three seconds, then release it. The Power Button menu appears.

    Power Button menu

  5. Press F4 to start the BIOS recovery.
  6. Wait 2–5 minutes for the recovery process to complete.

    Flash update has completed successfully

  7. The computer will either turn off when the recovery process is complete, or it will prompt you to turn it off.

Related Products

This article applies to 238 products

Intel® NUC Board with 12th Generation Intel® Core™ Processors
Intel® NUC Board NUC7PJYB
Intel® NUC Kit NUC8i3BEHS
Intel® NUC Kit NUC8i5BEHS
Intel® NUC Mini PC with 12th Generation Intel® Core™ Processors
Intel® NUC 8 Mainstream-G mini PC (NUC8i3INH)
Intel® NUC 8 Pro Mini PC NUC8i3PNK
Intel® NUC 8 Pro Mini PC NUC8v5PNK
Intel® NUC 8 Pro Mini PC NUC8v7PNK

Disclaimer

1

All postings and use of the content on this site are subject to Intel.com Terms of Use.