Article ID: 000074825 Content Type: Troubleshooting Last Reviewed: 01/21/2015

Why does it take several seconds for Active Serial (AS) configuration to complete after power-up of the Cyclone V GT FPGA development kit?

Environment

  • PCI Express
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Due to the design of the system controller in the MAX® V device, AS configuration is delayed for several seconds after power-up of the Cyclone® V GT FPGA development kit. 

    This delay may cause a problem if your design uses PCI Express (PCIe) and AS configuration mode, as this delay may result in not meeting the PCIe wake-up time requirement.

    Resolution

    To reduce the delay of AS configuration in the Cyclone V GT FPGA development kit, program the MAX V device with this Programmer Object File (.pof ) file: max5.pof

    You can also use this Quartus® II project: max5_CVGT_devkit_AS.zip for the design in the MAX V device.

    Related Products

    This article applies to 3 products

    Intel® FPGA Configuration Devices
    Cyclone® V GT FPGA
    Intel® FPGA Configuration Device EPCQ