Article ID: 000074885 Content Type: Error Messages Last Reviewed: 03/17/2017

Error (209014): CONF_DONE failed to go high in device <number>

Environment

  • Intel® Quartus® Prime Standard Edition
  • Intel® Stand-Alone Programmer 10.23 (For Legacy Max+Plus® II Software)
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Due to an issue in the Quartus® Prime software version 16.1.1 and earlier, you may observe this error in the Quartus Prime programmer when programming MAX® 10 devices with date code 1625 and onwards, using the following sequence:

    Full-chip erase --> SOF configuration --> Power cycle/pulse nCONFIG --> SOF/POF programming.

     

    Resolution

    This issue is fixed in Quartus Prime software version 16.1.2.

    Related Products

    This article applies to 1 products

    Intel® MAX® 10 FPGAs