Article ID: 000080187 Content Type: Troubleshooting Last Reviewed: 10/17/2011

PLL tabs for Reconfiguration Settings in the ALTGX MegaWizard Plug-In Manager for Stratix IV are incorrect

Environment

  • Quartus® II Subscription Edition
  • PLL
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT

    Critical Issue

    Description

    In the ALTGX MegaWizard Plug-In Manager, on each of the Main PLL and Alt PLL tabs of the Reconfiguration Settings page, the dropdown boxes of the top two options are mismatched:

    • What is the PLL logical reference index(used in reconfiguration)
    • What is the selected input clock source for the Rx/Tx PLLs

    The dropdown box to the right of What is the PLL logical reference index (used in reconfiguration) sets the What is the selected input clock source for the Rx/Tx PLLs option; likewise, the dropdown box to the right of What is the selected input clock source for the Rx/Tx PLLs sets the What is the PLL logical reference index (used in reconfiguration) option.

    Resolution

    Use the dropdown box to the right of What is the PLL logical reference index (used in reconfiguration) to set the What is the selected input clock source for the Rx/Tx PLLs option and use the dropdown box to the right of What is the selected input clock source for the Rx/Tx PLLs to set the What is the PLL logical reference index (used in reconfiguration) option.

    Related Products

    This article applies to 1 products

    Stratix® IV FPGAs