Article ID: 000083680 Content Type: Troubleshooting Last Reviewed: 09/11/2012

What happens if I drive nSTATUS or CONF_DONE low after configuration and initialization are complete for a FLEX device?

Environment

BUILT IN - ARTICLE INTRO SECOND COMPONENT
Description

If you drive nSTATUS or CONF_DONE low after configuration and initialization are complete for a FLEX® device, there will be no impact on the device operation.

However, if the process is between configuration and initialization and nSTATUS driven low, the device will not enter user mode. Driving CONF_DONE low will have no adverse affects, it will just delay the initialization process. If you are using a configuration device to configure the FLEX device and CONF_DONE is driven low, you may drive nSTATUS low to restart the configuration process.

Related Products

This article applies to 1 products

Flex® 10K