Article ID: 000087640 Content Type: Error Messages Last Reviewed: 06/06/2023

Error row ‘x’ digital frequency must be at least 820.312500 MHz

Environment

  • Intel® Quartus® Prime Pro Edition
  • Intel® FPGA Power Thermal Calculator
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Due to a problem in the Intel® FPGA Power and Thermal Calculator (PTC) version 21.3 and earlier, you might see an error in the message pane referencing the transceiver (XCVR) page after importing a .qptc file. This problem only affects Intel Agilex® 7 devices.            

     

    Resolution

    To work around this problem, correct the setting manually by changing the digital frequency from 0.01 to at least 820.312500 MHz . The digital frequency can be toggled depending on your usage.

    This problem is fixed starting with the Intel® Quartus® Prime Pro Edition Software version 21.4.

    Related Products

    This article applies to 1 products

    Intel Agilex® 7 FPGAs and SoC FPGAs