Article ID: 000088735 Content Type: Product Information & Documentation Last Reviewed: 11/07/2023

Why does the Intel® Quartus® Prime Standard Edition Software incorrectly show the right-side transceiver power rails in the 5AGXBB1D4F40 device?

Environment

  • Intel® Quartus® Prime Standard Edition
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Due to a problem in the Intel® Quartus® Prime Standard Edition Software version 21.1 and earlier, you might see the incorrect transceiver power rails in the pin-out file and the .pin file of the Arria® V device, 5AGXBB1D4F40, which shows both left/right side transceiver power (i.e., VCCL_GXBL & VCCL_GXBR) is connected. 

    Resolution

    The 5AGXBB1D4F40 device has only the left-side transceiver, you may ignore the right-side transceiver pins (VCCL_GXBR , VCCH_GXBR, etc.) and connect these pins to GND.

    Related Products

    This article applies to 1 products

    Arria® V GX FPGA