Article ID: 000092176 Content Type: Troubleshooting Last Reviewed: 06/01/2023

What is the latest Device Firmware available for the Intel® Quartus® Prime Pro Edition Software version 22.1?

Environment

  • Intel® Quartus® Prime Pro Edition
  • Intel® Quartus® Prime Pro Edition Programmer and Tools
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT

    Critical Issue

    Description

    The latest Device Firmware for the Intel® Quartus® Prime Pro Edition Software version 22.1 can be downloaded from the links below.

    Fixes for the following problems are included in the latest release (The newest release contains all prior fixes and supersedes earlier Device Firmware releases).

    Change log :  

    Firmware version 0.17fw:

    - Fix Intel Agilex® FPGA CvP Update failure after accessing QSPI via Mailbox Client IP.

    - Fix for Incorrect PMBus frequency and duty cycle in the first configuration cycle after power up and PCIe/Ethernet functional failure after reconfiguration.

    Firmware version 0.29fw:

    - Fix M20K functional errors in Partial Reconfiguration Regions, seen after partial reconfiguration on Intel Agilex® FPGAs.   
    - Fix HPS boot instability due to erroneously disabled HPS RAM repair functionality. 

    Firmware version 0.34fw:

    - Fix SHA mismatch errors and AVSTx8 configuration failures when using an encrypted bitstream configuration.

    Firmware version 0.40fw:

                - Fix SDM firmware bug when the Sub-System Manager (SSM) RAM repair information is applied incorrectly. This RAM is inaccessible to users. The impacted Intel Agilex® OPNs are: AGF019, AGF023, AGI019, AGI023.

    Firmware version 0.44fw:

    - Fix a bug where the RSU fails to recover after using an incorrect device application image.

    - Fix a bug where during Intel Agilex® FPGA 2x8 bifurcation mode, refclk1 is not present because PCIe0 cannot be identified after reboot.

    - Fixes random Partial Reconfiguration(PR) failure seen after PR interruption by resetting LSM after the interruption.

    Please also see the following:

    Updating the SDM Firmware in the Intel Agilex® FPGA Configuration User Guide

     

    Updating the SDM Firmware in the Intel® Stratix® 10 FPGA Configuration User Guide

     

    Resolution

    Download the latest device firmware from the following links:

    Note:

    • Patches must be applied to the Intel® Quartus® Prime Edition Software and the Intel® Quartus® Prime Pro Edition Programmer and Tools.
    • Recompilation is not required.
    • All Programming files should be recreated.
      • Re-run programming file generation or conversion using Intel® Quartus® Programming File Generator.

    Related Products

    This article applies to 2 products

    Intel Agilex® 7 FPGAs and SoC FPGAs
    Intel® Stratix® 10 FPGAs and SoC FPGAs