Intel® Quartus® Prime Pro Edition User Guide: Design Optimization

ID 683641
Date 12/04/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

7.4.1. ECO Command Quick Reference

Table 44.  ECO Command Quick Reference
ECO Change ECO Commands
Route
make_connection -from <src> -to <dst> -port <port>
remove_connection -from <src> -to <dst> -port <port>
Tie-Off
make_connection –tieoff <VCC/GND> -to <node> -port <port>
Lutmask
modify_lutmask -to <node> [-eqn <lut equation>] [-mask 0x00]
Slew Rate
modify_io_slew_rate <value> -to <pin_name>
Current Strength
modify_io_current_strength <value> -to <pin_name>
Delay Chains
modify_io_delay_chain <value> -type <io_type> -to <pin_name>
Update MIF
update_mif_files
IOPLL Ref Clock ( Intel® Stratix® 10 devices only)
adjust_pll_refclk -to <pll name> -refclk <freq>
Create New Node
create_new_node -type <LUT|FF> -name <name>
Remove Node
remove_node -name <name>
Place Node
place_node -name <name> [-location <location>]
Unplace Node
unplace_node -name <name>
Create Wirelut
create_wirelut -from <src> -to <dst> -port <port> [-location <location>]