Quick-Start for Intel® Quartus® Prime Pro Edition Software

Download PDF
ID 683769
Date 10/22/2018
Public
Document Table of Contents
Document Table of Contents x
Quick-Start for Intel® Quartus® Prime Pro Edition Software Document Revision History for Quick-Start for Intel® Quartus® Prime Pro Edition
Quick-Start for Intel® Quartus® Prime Pro Edition Software x
Step 1: Create your Design Step 2: Constrain your Design Step 3: Compile your Design Step 4: Close Timing on your Design Step 5: Configure your Design on the Board
Quick-Start for Intel® Quartus® Prime Pro Edition Software
Document Revision History for Quick-Start for Intel® Quartus® Prime Pro Edition

Step 5: Configure your Design on the Board

Once your design meets the specifications, you can create programming files and upload those files to the device.
Note: This stage assumes that you correctly connected the target device to the computer.
Figure 5.  Intel® Quartus® Prime Programmer
  1. In the Compilation Dashboard, run the Assembler stage to generate programming files.
  2. Open the Programmer by clicking Tools > Programmer.
  3. In the Programmer window, click Hardware Setup.
  4. Select the hardware for the device, and click Close.
  5. Click Auto Detect to detect devices connected to the computer.
  6. Click the target device in the device list.
  7. Click the programming file that you want to upload to the device, and click Start.
    When the Programmer finishes, the Progress bar on the upper left corner of the window indicates the outcome.
For more information about programming devices, refer to Programming Intel FPGA devices chapter in the Intel® Quartus® Prime Pro Edition Handbook Volume 3.
Related Information
Level Two Title