Agilex™ 7 Device Family Pin Connection Guidelines: M-Series

Download PDF
ID 776197
Date 4/01/2024
Public
Document Table of Contents
Document Table of Contents x
1. Agilex™ 7 Device Family Pin Connection Guidelines: M-Series
1. Agilex™ 7 Device Family Pin Connection Guidelines: M-Series x
1.1. Pins Status for Agilex™ 7 M-Series Devices 1.2. Agilex™ 7 M-Series FPGA Core Pins 1.3. Agilex™ 7 M-Series HBM2E Pins 1.4. Agilex™ 7 M-Series F-Tile Pins 1.5. Agilex™ 7 M-Series R-Tile Pins 1.6. Agilex™ 7 M-Series Hard Processor System (HPS) Pins 1.7. Agilex™ 7 M-Series Power Supply Sharing Guidelines 1.8. Notes to Agilex™ 7 M-Series Device Family Pin Connection Guidelines 1.9. Document Revision History for the Agilex™ 7 Device Family Pin Connection Guidelines: M-Series
1.2. Agilex™ 7 M-Series FPGA Core Pins x
1.2.1. Clock and PLL Pins 1.2.2. Dedicated Configuration/JTAG Pins 1.2.3. Optional/Dual-Purpose Configuration Pins 1.2.4. Differential I/O Pins 1.2.5. External Memory Interface Pins 1.2.6. Voltage Sensor and Voltage Reference Pins 1.2.7. Remote Temperature Sensing Diode Pins 1.2.8. Reference Pins 1.2.9. No Connect and DNU Pins 1.2.10. Power Supply Pins 1.2.11. Secure Device Manager (SDM) Pins 1.2.12. Secure Device Manager (SDM) Optional Signal Pins
1.3. Agilex™ 7 M-Series HBM2E Pins x
1.3.1. HBM2E Power Supply Pins 1.3.2. HBM2E Signal Pins
1.4. Agilex™ 7 M-Series F-Tile Pins x
1.4.1. F-Tile Power Supply Pins 1.4.2. F-Tile Transceiver Pins
1.5. Agilex™ 7 M-Series R-Tile Pins x
1.5.1. R-Tile Power Supply Pins 1.5.2. R-Tile Transceiver Pins
1.6. Agilex™ 7 M-Series Hard Processor System (HPS) Pins x
1.6.1. HPS Supply Pins 1.6.2. HPS Oscillator Clock Input Pin 1.6.3. HPS JTAG Pins 1.6.4. HPS GPIO Pins 1.6.5. HPS SDMMC Pins 1.6.6. HPS NAND Pins 1.6.7. HPS USB Pins 1.6.8. HPS EMAC Pins 1.6.9. HPS I2C_EMAC and MDIO Pins 1.6.10. HPS I2C Pins 1.6.11. HPS SPI Pins 1.6.12. HPS UART Pins 1.6.13. HPS Trace Pins
1.7. Agilex™ 7 M-Series Power Supply Sharing Guidelines x
1.7.1. Example 1— Agilex™ 7 M-Series Devices with R-Tile, F-Tile and HBM2E Using DDR4 1.7.2. Example 2— Agilex™ 7 M-Series Devices with R-Tile, F-Tile and HBM2E Using DDR5 1.7.3. Example 3— Agilex™ 7 M-Series Devices with R-Tile and F-Tile, Without HBM2E Using DDR4 1.7.4. Example 4— Agilex™ 7 M-Series Devices with F-Tile only and HBM2E Using DDR4 1.7.5. Example 5— Agilex™ 7 M-Series Devices with F-Tile only and HBM2E Using DDR5 1.7.6. Example 6— Agilex™ 7 M-Series Devices with F-Tile only and Without HBM2E Using DDR5
1. Agilex™ 7 Device Family Pin Connection Guidelines: M-Series

1.7.6. Example 6— Agilex™ 7 M-Series Devices with F-Tile only and Without HBM2E Using DDR5

Table 35.  Power Supply Sharing Guidelines for Agilex™ 7 M-Series Devices with F-Tile Transceivers only, Without HBM2E Using DDR5Example Requiring 9 Power Regulators
Power Pin Name Regulator Group Voltage Level (V) Supply Tolerance Power Source Regulator Sharing Notes
VCC 1 SmartVID15, 0.8 ±3% Switcher 16 Share

Source VCC and VCCP from the same regulator, sharing the same voltage plane. You have the option to connect VCCL_HPS to the same regulator as VCC and VCCP when the power rails require the same voltage level. You may also connect the VCCPLLDIG_HPS power to the shared VCC, VCCP, and VCCL_HPS power planes with proper isolation filtering.

For -4X devices, VCC and VCCP are powered by SmartVID and a separate fixed 0.8 V supply must be used for VCCL_HPS and filtered VCCPLLDIG_HPS.

When implementing a filtered supply topology,you must consider the IR drop across the filter.

If you do not intend to utilize the HPS in the Agilex™ 7 M-Series device, you must still provide power to these power supply pins. Do not leave the VCCL_HPS and VCCPLLDIG_HPS power supply pins floating or connected to GND.

VCCP
VCCL_HPS
VCCPLLDIG_HPS Filter
VCCH 2 0.8 ±3% Switcher16

Share

Connect these rails to a dedicated 0.8-V power supply.

When implementing a filtered supply topology, you must consider the IR drop across the filter.
VCC_HSSI_GXF
VCCL_SDM
VCCH_SDM
VCCLPLL_NOC Filter
VCCPLLDIG_SDM Filter
VCCPLLDIG_NOC Filter
VCCERT_FGT_GXF 3 1.0 ±2.5%

Switcher16 or Linear

Share

Connect to a dedicated 1.0-V power supply.
VCCERT1_FHT_GXF
VCCERT2_FHT_GXF
VCCFUSEWR_GXF
VCCFUSECORE_GXF
VCCEHT_FHT_GXF 4 1.5 -2.5% to +2% Linear Isolate Connect to a dedicated 1.5-V power supply.
VCCPT 5 1.8 ±3% Switcher16 Share

Connect VCCPT to a dedicated 1.8-V power supply.

Connect VCCADC, VCCPLL_SDM, VCCPLL_HPS, VCCH_FGT_GXF, and VCCCLK_GXF to the same power plane with proper isolation filtering.

Depending on the regulator capabilities, you have the option to share this supply with multiple Agilex™ 7 M-Series devices.

VCCIO_NOC
VCCIO_SDM
VCCIO_HPS
VCCFUSEWR_SDM
VCCH_FGT_GXF Filter
VCCADC Filter
VCCPLL_SDM
VCCPLL_HPS
VCCPLL_NOC Filter
VCCCLK_GXF Filter
VCCRCORE 6 1.2 ±5% Switcher16 Share

Connect to a dedicated 1.2-V power supply.

When implementing a filtered supply topology, you must consider the IR drop across the filter.
VCCIO_PIO_SDM
VCCIO_PIO_T/B 7 1.1 ±3% Switcher16 Isolate Connect to a dedicated 1.1-V power supply.

Each board design requires its own power analysis to determine the required power regulators needed to satisfy the specific board design requirements. An example block diagram using the Agilex™ 7 M-Series devices is provided in the following figure.

Figure 6. Example Power Supply Sharing Guidelines for Agilex™ 7 M-Series Devices with F-Tile only, Without HBM2E Using DDR5
Related Information
15 For the SmartVID voltage range, refer to the Agilex™ 7 FPGAs and SoCs Device Data Sheet: M-Series .
16 When using a switcher to supply these voltages, the switcher must be a low noise switcher as defined in note 4 of the Notes to Agilex™ 7 M-Series Device Family Pin Connection Guidelines .
Level Two Title