L- and H-Tile Avalon® Streaming and Single Root I/O Virtualization (SR-IOV) Intel® FPGA IP for PCI Express* User Guide

Download PDF
ID 683111
Date 4/23/2024
Public
Document Table of Contents
Document Table of Contents x
1. Introduction 2. Quick Start Guide 3. Interface Overview 4. Parameters 5. Designing with the IP Core 6. Block Descriptions 7. Interrupts 8. Registers 9. Testbench and Design Example 10. Document Revision History A. PCI Express Core Architecture B. TX Credit Adjustment Sample Code C. Root Port Enumeration D. Troubleshooting and Observing the Link Status
1. Introduction x
1.1. Avalon-ST Interface with Optional SR-IOV for PCIe Introduction 1.2. Features 1.3. Release Information 1.4. Device Family Support 1.5. Recommended Fabric Speed Grades 1.6. Performance and Resource Utilization 1.7. Transceiver Tiles 1.8. PCI Express IP Core Package Layout 1.9. Channel Availability
2. Quick Start Guide x
2.1. Design Components 2.2. Hardware and Software Requirements 2.3. Directory Structure 2.4. Generating the Design Example 2.5. Simulating the Design Example 2.6. Compiling the Design Example and Programming the Device 2.7. Installing the Linux Kernel Driver 2.8. Running the Design Example Application
3. Interface Overview x
3.1. Avalon-ST RX Interface 3.2. Avalon-ST TX Interface 3.3. TX Credit Interface 3.4. TX and RX Serial Data 3.5. Clocks 3.6. Function-Level Reset (FLR) Interface 3.7. Control Shadow Interface for SR-IOV 3.8. Configuration Extension Bus Interface 3.9. Hard IP Reconfiguration Interface 3.10. Interrupt Interfaces 3.11. Power Management Interface 3.12. Reset 3.13. Transaction Layer Configuration Interface 3.14. PLL Reconfiguration Interface 3.15. PIPE Interface (Simulation Only)
4. Parameters x
4.1. Stratix 10 Avalon-ST Settings 4.2. Multifunction and SR-IOV System Settings 4.3. Base Address Registers 4.4. Device Identification Registers 4.5. TPH/ATS Capabilities 4.6. PCI Express and PCI Capabilities Parameters 4.7. Configuration, Debug and Extension Options 4.8. PHY Characteristics 4.9. Example Designs
4.6. PCI Express and PCI Capabilities Parameters x
4.6.1. Device Capabilities 4.6.2. Link Capabilities 4.6.3. MSI and MSI-X Capabilities 4.6.4. Slot Capabilities 4.6.5. Power Management 4.6.6. Vendor Specific Extended Capability (VSEC)
5. Designing with the IP Core x
5.1. Generation 5.2. Simulation 5.3. IP Core Generation Output ( Quartus® Prime Pro Edition) 5.4. Integration and Implementation 5.5. Required Supporting IP Cores 5.6. Channel Layout and PLL Usage
5.2. Simulation x
5.2.1. Selecting Serial or PIPE Simulation
5.4. Integration and Implementation x
5.4.1. Clock Requirements 5.4.2. Reset Requirements
5.5. Required Supporting IP Cores x
5.5.1. Hard Reset Controller 5.5.2. TX PLL
6. Block Descriptions x
6.1. Interfaces 6.2. Errors reported by the Application Layer 6.3. Power Management 6.4. Transaction Ordering 6.5. RX Buffer
6.1. Interfaces x
6.1.1. TLP Header and Data Alignment for the Avalon-ST RX and TX Interfaces 6.1.2. Avalon-ST 256-Bit RX Interface 6.1.3. Avalon-ST 512-Bit RX Interface 6.1.4. Avalon-ST 256-Bit TX Interface 6.1.5. Avalon-ST 512-Bit TX Interface 6.1.6. TX Credit Interface 6.1.7. Interpreting the TX Credit Interface 6.1.8. Clocks 6.1.9. Update Flow Control Timer and Credit Release 6.1.10. Function-Level Reset (FLR) Interface 6.1.11. Resets 6.1.12. Interrupts 6.1.13. Control Shadow Interface for SR-IOV 6.1.14. Transaction Layer Configuration Space Interface 6.1.15. Configuration Extension Bus Interface 6.1.16. Hard IP Status Interface 6.1.17. Hard IP Reconfiguration 6.1.18. Power Management Interface 6.1.19. Serial Data Interface 6.1.20. PIPE Interface 6.1.21. Test Interface 6.1.22. PLL IP Reconfiguration 6.1.23. Message Handling
6.1.2. Avalon-ST 256-Bit RX Interface x
6.1.2.1. Avalon-ST RX Interface Three- and Four-Dword TLPs 6.1.2.2. Avalon-ST RX Interface rx_st_ready Deasserts for the 256-Bit Interface 6.1.2.3. Avalon-ST RX Interface rx_st_valid Deasserts 6.1.2.4. Avalon-ST RX Back-to-Back Transmission 6.1.2.5. Avalon-ST RX Interface Single-Cycle TLPs
6.1.3. Avalon-ST 512-Bit RX Interface x
6.1.3.1. PCIe TLP Layout Using the 512-Bit Interface
6.1.4. Avalon-ST 256-Bit TX Interface x
6.1.4.1. Avalon-ST TX Three- and Four-Dword TLPs 6.1.4.2. Avalon-ST TX Interface tx_st_ready Deassertion 6.1.4.3. Assertion and Deassertion of Avalon-ST TX Interface tx_st_valid
6.1.12. Interrupts x
6.1.12.1. MSI and Legacy Interrupts
6.1.23. Message Handling x
6.1.23.1. Endpoint Received Messages 6.1.23.2. Endpoint Transmitted Messages
6.2. Errors reported by the Application Layer x
6.2.1. Error Handling
6.3. Power Management x
6.3.1. Endpoint D3 Entry 6.3.2. End Point D3 Exit 6.3.3. Exit from D3 hot 6.3.4. Exit from D3 cold 6.3.5. Active State Power Management
6.4. Transaction Ordering x
6.4.1. TX TLP Ordering 6.4.2. RX TLP Ordering
6.5. RX Buffer x
6.5.1. Retry Buffer 6.5.2. Configuration Retry Status
7. Interrupts x
7.1. Interrupts for Endpoints
7.1. Interrupts for Endpoints x
7.1.1. MSI and Legacy Interrupts 7.1.2. MSI-X 7.1.3. Implementing MSI-X Interrupts 7.1.4. Legacy Interrupts
8. Registers x
8.1. Configuration Space Registers
8.1. Configuration Space Registers x
8.1.1. Register Access Definitions 8.1.2. PCI Configuration Header Registers 8.1.3. PCI Express Capability Structures 8.1.4. Intel Defined VSEC Capability Header 8.1.5. General Purpose Control and Status Register 8.1.6. Uncorrectable Internal Error Status Register 8.1.7. Uncorrectable Internal Error Mask Register 8.1.8. Correctable Internal Error Status Register 8.1.9. Correctable Internal Error Mask Register 8.1.10. SR-IOV Virtualization Extended Capabilities Registers Address Map
8.1.4. Intel Defined VSEC Capability Header x
8.1.4.1. Intel Defined Vendor Specific Header 8.1.4.2. Intel Marker 8.1.4.3. JTAG Silicon ID 8.1.4.4. User Configurable Device and Board ID
8.1.10. SR-IOV Virtualization Extended Capabilities Registers Address Map x
8.1.10.1. ARI Enhanced Capability Header 8.1.10.2. SR-IOV Enhanced Capability Registers 8.1.10.3. Initial VFs and Total VFs Registers 8.1.10.4. VF Device ID Register 8.1.10.5. Page Size Registers 8.1.10.6. VF Base Address Registers (BARs) 0-5 8.1.10.7. Secondary PCI Express Extended Capability Header 8.1.10.8. Lane Status Registers 8.1.10.9. Transaction Processing Hints (TPH) Requester Enhanced Capability Header 8.1.10.10. TPH Requester Capability Register 8.1.10.11. TPH Requester Control Register 8.1.10.12. Address Translation Services ATS Enhanced Capability Header 8.1.10.13. ATS Capability Register and ATS Control Register
9. Testbench and Design Example x
9.1. Endpoint Testbench 9.2. Test Driver Module 9.3. Root Port BFM Overview 9.4. BFM Procedures and Functions
9.1. Endpoint Testbench x
9.1.1. Endpoint Testbench for SR-IOV
9.3. Root Port BFM Overview x
9.3.1. BFM Memory Map 9.3.2. Configuration Space Bus and Device Numbering 9.3.3. Configuration of Root Port and Endpoint 9.3.4. Issuing Read and Write Transactions to the Application Layer
9.4. BFM Procedures and Functions x
9.4.1. ebfm_barwr Procedure 9.4.2. ebfm_barwr_imm Procedure 9.4.3. ebfm_barrd_wait Procedure 9.4.4. ebfm_barrd_nowt Procedure 9.4.5. ebfm_cfgwr_imm_wait Procedure 9.4.6. ebfm_cfgwr_imm_nowt Procedure 9.4.7. ebfm_cfgrd_wait Procedure 9.4.8. ebfm_cfgrd_nowt Procedure 9.4.9. BFM Configuration Procedures 9.4.10. BFM Shared Memory Access Procedures 9.4.11. BFM Log and Message Procedures 9.4.12. Verilog HDL Formatting Functions
9.4.9. BFM Configuration Procedures x
9.4.9.1. ebfm_cfg_rp_ep Procedure 9.4.9.2. ebfm_cfg_decode_bar Procedure
9.4.10. BFM Shared Memory Access Procedures x
9.4.10.1. Shared Memory Constants 9.4.10.2. shmem_write Task 9.4.10.3. shmem_read Function 9.4.10.4. shmem_display Verilog HDL Function 9.4.10.5. shmem_fill Procedure 9.4.10.6. shmem_chk_ok Function
9.4.11. BFM Log and Message Procedures x
9.4.11.1. ebfm_display Verilog HDL Function 9.4.11.2. ebfm_log_stop_sim Verilog HDL Function 9.4.11.3. ebfm_log_set_suppressed_msg_mask Task 9.4.11.4. ebfm_log_set_stop_on_msg_mask Verilog HDL Task 9.4.11.5. ebfm_log_open Verilog HDL Function 9.4.11.6. ebfm_log_close Verilog HDL Function
9.4.12. Verilog HDL Formatting Functions x
9.4.12.1. himage1 9.4.12.2. himage2 9.4.12.3. himage4 9.4.12.4. himage8 9.4.12.5. himage16 9.4.12.6. dimage1 9.4.12.7. dimage2 9.4.12.8. dimage3 9.4.12.9. dimage4 9.4.12.10. dimage5 9.4.12.11. dimage6 9.4.12.12. dimage7
10. Document Revision History x
10.1. Document Revision History for the Intel® L- and H-Tile Avalon® Streaming and Single-Root I/O Virtualization (SR-IOV) IP for PCI Express* User Guide
A. PCI Express Core Architecture x
A.1. Transaction Layer A.2. Data Link Layer A.3. Physical Layer
D. Troubleshooting and Observing the Link Status x
D.1. Troubleshooting D.2. PCIe Link Inspector Overview
D.1. Troubleshooting x
D.1.1. Simulation Fails To Progress Beyond Polling.Active State D.1.2. Hardware Bring-Up Issues D.1.3. Link Training D.1.4. Link Hangs in L0 State D.1.5. Use Third-Party PCIe Analyzer
D.2. PCIe Link Inspector Overview x
D.2.1. PCIe* Link Inspector Hardware
D.2.1. PCIe* Link Inspector Hardware x
D.2.1.1. Enabling the PCIe* Link Inspector D.2.1.2. Launching the PCIe* Link Inspector D.2.1.3. The PCIe* Link Inspector LTSSM Monitor D.2.1.4. Accessing the Configuration Space and Transceiver Registers D.2.1.5. Additional Status Commands
D.2.1.3. The PCIe* Link Inspector LTSSM Monitor x
D.2.1.3.1. LTSSM Monitor Registers D.2.1.3.2. ltssm_save2file <file_name> D.2.1.3.3. ltssm_file2console D.2.1.3.4. ltssm_debug_check D.2.1.3.5. ltssm_display <num_states> D.2.1.3.6. ltssm_save_oldstates
D.2.1.4. Accessing the Configuration Space and Transceiver Registers x
D.2.1.4.1. PCIe* Link Inspector Commands D.2.1.4.2. NPDME PLL and Channel Commands D.2.1.4.3. Register Address Map
D.2.1.5. Additional Status Commands x
D.2.1.5.1. Displaying PLL Lock and Calibration Status Registers
1. Introduction
2. Quick Start Guide
3. Interface Overview
4. Parameters
5. Designing with the IP Core
6. Block Descriptions
7. Interrupts
8. Registers
9. Testbench and Design Example
10. Document Revision History
A. PCI Express Core Architecture
B. TX Credit Adjustment Sample Code
C. Root Port Enumeration
D. Troubleshooting and Observing the Link Status

6.1.4. Avalon-ST 256-Bit TX Interface

The Application Layer transfers data to the Transaction Layer of the PCIe IP core over the Avalon-ST TX interface. This is a 256-bit interface.
Table 33.  256‑Bit Avalon-ST TX Datapath

Signal

Direction

Description

tx_st_data[255:0]

Input

Data for transmission. The Application Layer must provide a properly formatted TLP on the TX interface. Valid when tx_st_valid is asserted (subject to the ready latency, see below). The mapping of message TLPs is the same as the mapping of Transaction Layer TLPs with 4 dword headers. The number of data cycles must be correct for the length and address fields in the header. Issuing a packet with an incorrect number of data cycles results in the TX interface hanging and becoming unable to accept further requests. In addition, the TLP must be no larger than the negotiated Max Payload size.

For the TLP requester ID field, bits[31:16] in dword1 specify the following information:

  • Bits[19:16]: Specify the PF number.
  • Bits[31:20]: Specify the VF number. The VF number is valid when tx_st_vf_active is asserted. If the request is from VF[<m>,<n>], then bits[19:16] drive the PF number, <m>, and bits [31:20] drive the VF number, <n>. The tx_st_vf_active signal asserts in the same cycle as tx_st_sop and tx_st_valid.

Refer to the TLP Header and Data Alignment for the Avalon-ST TX and Avalon-ST RX Interfaces for the layout of TLP headers and data.

tx_st_sop

Input

Indicates first cycle of a TLP when asserted together with tx_st_valid.

tx_st_eop

Input

Indicates last cycle of a TLP when asserted together with tx_st_valid.

tx_st_ready

Output

Indicates that the Transaction Layer is ready to accept data for transmission. The core deasserts this signal to throttle the data stream. tx_st_ready may be asserted during reset. The Application Layer should wait at least 2 clock cycles after the reset is released before issuing packets on the Avalon-ST TX interface. The reset_status signal can also be used to monitor when the IP core has come out of reset.

If tx_st_ready is asserted by the Transaction Layer on cycle <n>, then <n> + readyLatency is a ready cycle, during which the Application Layer may assert tx_st_valid and transfer data.

If tx_st_ready is deasserted by the Transaction Layer on cycle <n>, then the Application Layer must deassert tx_st_valid within the readyLatency number of cycles after cycle <n>.

The readyLatency is 3 coreclkout_hip cycles.

This interface is not strictly Avalon® -ST compliant.

tx_st_valid

Input

Clocks tx_st_data to the core when tx_st_ready is also asserted. Between tx_st_sop and the corresponding tx_st_eop, tx_st_valid must not be deasserted, except in response to tx_st_ready deassertion. When tx_st_ready deasserts in the middle of a packet, this signal must deassert exactly 3 coreclkout_hip cycles later. When tx_st_ready reasserts, and tx_st_data is in mid-TLP, this signal must reassert within 3 cycles. The figure entitled Avalon-ST TX Interface tx_st_ready Deasserts illustrates the timing of this signal.

To facilitate timing closure, Intel recommends that you register both the tx_st_ready and tx_st_valid signals.

tx_st_err

Input

Forces an error on transmitted TLP. This signal is used to nullify a packet. To nullify a packet, assert this signal for 1 cycle with tx_st_eop. When a packet is nullified, the following packet should not be transmitted until the next clock cycle.

Note: You cannot nullify a packet with 8 DW or less of data.
tx_st_parity[31:0]

Input

The IP core supports byte parity. Each bit represents even parity of the associated byte of the tx_st_data bus. For example, bit[0] corresponds to tx_st_data[7:0], bit[1] corresponds to tx_st_data[15:8], and so on.

tx_st_vf_active H-Tile Input

When asserted, the transmitting TLP is for a VF. When deasserted, the transmitting TLP is for a PF. Valid when tx_st_sop is asserted.

Valid when multiple virtual functions are enabled.


Section Content
Avalon-ST TX Three- and Four-Dword TLPs
Avalon-ST TX Interface tx_st_ready Deassertion
Assertion and Deassertion of Avalon-ST TX Interface tx_st_valid

Related Information
Level Two Title