Intel® Programmable Acceleration Card (PAC) with Intel® Arria® 10 GX FPGA Data Sheet

Download PDF
ID 683226
Date 10/26/2020
Public
Document Table of Contents
Document Table of Contents x
1. Introduction 2. Overview 3. System Compatibility 4. Mechanical Information 5. Thermal Specifications 6. FPGA Interface Manager 7. Board Management Controller 8. PLDM Commands for the Board Management Controller A. Regulatory Information B. References C. Revision History
2. Overview x
2.1. Views of the Intel® PAC with Intel® Arria® 10 GX FPGA 2.2. Overview of Product Features
2.2. Overview of Product Features x
2.2.1. Intel® Arria® 10 GX FPGA 2.2.2. On-Board Memory 2.2.3. Interfaces and Dimensions 2.2.4. Software 2.2.5. Power 2.2.6. CPLD 2.2.7. QSFP+ 2.2.8. Control and Support
2.2.8. Control and Support x
2.2.8.1. PCIe Overview 2.2.8.2. Board Management Controller Overview
4. Mechanical Information x
4.1. Air Duct Disassembly
5. Thermal Specifications x
5.1. Thermal Test Performance Results
6. FPGA Interface Manager x
6.1. Updating the FIM
7. Board Management Controller x
7.1. Features 7.2. Device Peripheral Table 7.3. Updating the BMC Configuration and Firmware
7.1. Features x
7.1.1. BMC Voltage and Thermal Handling
8. PLDM Commands for the Board Management Controller x
8.1. I2C/SMBus Address 8.2. Supported SMBus Commands 8.3. Supported MCTP Commands 8.4. Supported PLDM Commands 8.5. Defined Platform Descriptor Records 8.6. Sensor and Threshold Information
8.3. Supported MCTP Commands x
8.3.1. MCTP Control Messages
8.4. Supported PLDM Commands x
8.4.1. PLDM Base Specification Commands 8.4.2. PLDM for Platform Monitoring and Control Specification Commands
1. Introduction
2. Overview
3. System Compatibility
4. Mechanical Information
5. Thermal Specifications
6. FPGA Interface Manager
7. Board Management Controller
8. PLDM Commands for the Board Management Controller
A. Regulatory Information
B. References
C. Revision History

6. FPGA Interface Manager

The FPGA Interface Manager (FIM) contains the FPGA logic to support the accelerators, including the PCIe IP core, the Core Cache Interface protocol (CCI-P) fabric, the onboard DDR memory interface, and management engine. Specific features of the FIM are listed in the following documents:

The 1024 Mb flash memory stores the FPGA Interface Manager (FIM) which provides a common user interface for placement of accelerator functions. In addition, the FIM allows dynamic downloading of new accelerator functions and updates to the FIM.

The FIM can read all sensor data from the BMC, using the Intel Acceleration Stack. For example, to read the FPGA temperature, use the following command: 

sudo fpgainfo temp

To read voltage and current data, use the following command:

sudo fpgainfo power

Refer to the Intel Acceleration Stack Quick Start Guide for the Intel® Programmable Acceleration Card with Intel® Arria® 10 GX FPGA to learn how to use these features.


Section Content
Updating the FIM

Level Two Title