Errata Sheet and Guidelines for MAX 10 ES Devices

Download PDF
ID 683630
Date 6/12/2015
Public
Document Table of Contents
Document Table of Contents x
1. Device Errata for MAX 10 ES Devices 2. Device Guidelines for MAX® 10 ES Devices 3. Document Revision History
1. Device Errata for MAX 10 ES Devices x
1.1. ADC Prescalar 1.2. ESD Performance 1.3. Timing Model Adjustment
2. Device Guidelines for MAX® 10 ES Devices x
2.1. Recommended Power-up Sequencing for MAX 10 ES Devices 2.2. Full Chip Erase Prior to Initial Device Programming 2.3. Migration Guidelines
1. Device Errata for MAX 10 ES Devices
2. Device Guidelines for MAX® 10 ES Devices
3. Document Revision History

2.3. Migration Guidelines

This migration guidelines is applicable if you plan to use MAX® 10 SC or SF variant (for single supply devices) and DC or DF variant (for dual supply devices) in production devices.

Altera recommends designing your board with MAX® 10 ES device SA or DA variant according to the recommendation for SC or SF variant (for single supply devices) and DC or DF variant (for dual supply devices). There are cross variants pin mismatches between MAX® 10 ES devices and MAX® 10 production devices. You can migrate the pins as recommended in the following tables without impact to your design.

Table 4.   MAX® 10 Devices Migration from ES Device SA Variant to Production Device SC or SF Variant
MAX® 10 ES Device SA Variant Pin MAX® 10 Production Device SC or SF Variant Pin
ADC_VREF VCCA
ANAIN1 GND
REFGND GND
ADC1IN[1..8] I/O
Table 5.   MAX® 10 Devices Migration from ES Device DA Variant to Production Device DC or DF Variant
MAX® 10 ES Device DA Variant Pin MAX® 10 Production Device DC or DF Variant Pin
ADC_VREF VCCA
ANAIN[1..2] GND
REFGND GND
ADC1IN[1..16] or ADC[1..2]IN[1..8] I/O
VCCA_ADC VCCA
VCCINT VCC
Level Two Title