Intel® Quartus® Prime Pro Edition User Guide: PCB Design Tools

ID 683768
Date 8/01/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

4.1. Integrating with DxDesigner

You can integrate the Siemens EDA DxDesigner schematic capture tool into the Intel® Quartus® Prime design flow. Use DxDesigner to create flat circuit schematics or to create hierarchical schematics that facilitate design reuse and a team-based design for all PCB types.
If you use DxDesigner without the I/O Designer software, the design flow is one-way, using only the .pin generated by the Intel® Quartus® Prime software. You can only make signal and pin assignment changes in the Intel® Quartus® Prime software. You cannot back-annotate changes made in a board layout tool or in a DxDesigner symbol to the Intel® Quartus® Prime software.
Figure 20. DxDesigner-only Flow