Battery Management System Reference Design

Download PDF
ID 683279
Date 4/02/2016
Public
Document Table of Contents
Document Table of Contents x
1. Battery Management System Reference Design
1. Battery Management System Reference Design x
1.1. BMS Reference Design Features 1.2. BMS Reference Design Getting Started 1.3. BMS Reference Design Functional Description 1.4. BMS Reference Design FPGA Resource Usage 1.5. BMS Reference Design Benchmarking 1.6. Acknowledgements for the BMS Reference Design
1.2. BMS Reference Design Getting Started x
1.2.1. BMS Reference Design Software Requirements 1.2.2. BMS Reference Design Hardware Requirements 1.2.3. Downloading and Installing the BMS Reference Design 1.2.4. Setting Up the MAX 10 Development Board 1.2.5. Compiling the FPGA Hardware Design for the BMS Reference Design 1.2.6. Compiling the Nios Software for the BMS Reference Design 1.2.7. Programming the BMS Reference Design Hardware onto the Device 1.2.8. Downloading the BMS Reference Design Nios II Software to the Device 1.2.9. MATLAB Simulink Top-Level Design for the BMS Reference Design 1.2.10. Running the BMS Reference Design in a System-in-the-Loop Simulation
1.3. BMS Reference Design Functional Description x
1.3.1. BMS Reference Design Car Model 1.3.2. BMS Reference Design Battery Model 1.3.3. BMS Reference Design DEKF Technique 1.3.4. BMS Reference Design Hardware Implementation
1.3.4. BMS Reference Design Hardware Implementation x
1.3.4.1. BMS Reference Design Matrix Processor 1.3.4.2. BMS Reference Design uCode Controller Interface 1.3.4.3. BMS Reference Design DEKF IP (Design C)
1. Battery Management System Reference Design

1.2.8. Downloading the BMS Reference Design Nios II Software to the Device

  1. Start Nios II EDS, by clicking Start > Altera > Nios II EDS > Nios II Command Shell
  2. In the command shell, go to the software project folder by entering:cd <reference_design_path>/software/bms_soc_microc
  3. In the command shell, download the software by entering: nios2-download -r –g bms_soc_microc.elf
    When the downloadis successful, you see the following message in the terminal: 
    Using cable “USB-BlasterII on <computername> [USB-1]”, device 1, instance 0x00
Resetting and pausing target processor: OK
Initializing CPU cache <if present>
OK
Downloaded 65KB in 0.0s
Verified OK
Starting Processor at address 0x00000190
  4. In the Nios II EDS, click Run > Run configurations... .
  5. Double click Nios II Hardware to generate a new run configuration.
  6. Click New_configuration.
  7. On the Project tab select the bms_soc_microc project in Project name.
  8. Turn on Enable browse for file system ELF file.
  9. Browse to the software\ bms_soc_microc and select bms_soc_microc.elf.
  10. On the Target Connection tab, click Refresh Connections.
    The software finds the USB-Blaster cable.
  11. Click Apply to save changes, optionally specifying a name for the new configuration.
  12. Click Run to start the software.
  13. Check that the terminal console display shows the message: 
    Start hardware interaction
Level Two Title