Intel® MAX® 10 FPGA Device Architecture

Download PDF
ID 683105
Date 10/31/2022
Public
Document Table of Contents
Document Table of Contents x
1. Intel® MAX® 10 FPGA Device Architecture
1. Intel® MAX® 10 FPGA Device Architecture x
1.1. Logic Array Block 1.2. Embedded Memory 1.3. Embedded Multiplier 1.4. Clocking and PLL 1.5. General Purpose I/O 1.6. High-Speed LVDS I/O 1.7. External Memory Interface 1.8. Analog to Digital Converter 1.9. Configuration Schemes 1.10. User Flash Memory 1.11. Power Management 1.12. Document Revision History for Intel® MAX® 10 FPGA Device Architecture
1.1. Logic Array Block x
1.1.1. LAB Interconnects 1.1.2. LAB Control Signals 1.1.3. Logic Elements
1.1.3. Logic Elements x
1.1.3.1. LE Features 1.1.3.2. LE Operating Modes
1.1.3.2. LE Operating Modes x
1.1.3.2.1. Normal Mode 1.1.3.2.2. Arithmetic Mode
1.3. Embedded Multiplier x
1.3.1. 18-Bit Multipliers 1.3.2. 9-Bit Multipliers
1.4. Clocking and PLL x
1.4.1. Global Clock Networks 1.4.2. Internal Oscillator 1.4.3. PLL Block and Locations
1.5. General Purpose I/O x
1.5.1. Intel® MAX® 10 I/O Banks Architecture 1.5.2. Intel® MAX® 10 I/O Banks Locations
1.6. High-Speed LVDS I/O x
1.6.1. Intel® MAX® 10 High-Speed LVDS Circuitry 1.6.2. Intel® MAX® 10 High-Speed LVDS I/O Location
1.7. External Memory Interface x
1.7.1. Intel® MAX® 10 I/O Banks for External Memory Interface
1.8. Analog to Digital Converter x
1.8.1. ADC Block Locations
1.9. Configuration Schemes x
1.9.1. JTAG Configuration 1.9.2. Internal Configuration
1.11. Power Management x
1.11.1. Single-Supply Device 1.11.2. Dual-Supply Device 1.11.3. Power Management Controller Scheme 1.11.4. Hot Socketing
1. Intel® MAX® 10 FPGA Device Architecture

1.4.3. PLL Block and Locations

The main purpose of a PLL is to synchronize the phase and frequency of the voltage-controlled oscillator (VCO) to an input reference clock.
Figure 12.  Intel® MAX® 10 PLL High-Level Block DiagramEach clock source can come from any of the two or four clock pins located on the same side of the device as the PLL.

The following figures show the physical locations of the PLLs. Every index represents one PLL in the device. The physical locations of the PLLs correspond to the coordinates in the Intel® Quartus® Prime Chip Planner.

Figure 13. PLL Locations for 10M02 Device
Figure 14. PLL Locations for 10M04 and 10M08 Devices
Figure 15. PLL Locations for 10M16, 10M25, 10M40 and 10M50 Devices
Level Two Title