H-Tile Hard IP Ethernet Intel® FPGA IP User Guide: Stratix® 10 Devices

ID 683430
Date 4/09/2024
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

B.6.66. Configure TX Statistics Counters

Configure TX Statistics Counters

Configuration bits to control the behavior of the TX Statistics counters

Offset: 0x845

Configure TX Statistics Counters Fields

Bit Name Description Access Reset
2 tx_shadow_req TX Shadow Request
1: Freeze stats CSRs so that all TX Stats values read from the registers will be from the same moment.
  • Note that the actual stats collection counters are not frozen, but because they are all 'read' at the time of the freeze, they are cleared
  • If a shadow request is started while snapshot is active, a new capture will be executed
  • Likewise, if a shadow request is active while snapshot is asserted, a new capture will be executed
  • While either a shadow request or a capture is active, tx_shadow_on will be high
  • Snapshot and shadow requests apply to several of the RX PCS counters as well as MAC statistics
RW 0x0
1 rst_tx_parity Reset the TX Statistics Parity Error bit
1: Reset the parity error bit in cntr_TX_status
  • Parity error bit will remain in reset until rst_tx_parity is set back to 0
RW 0x0
0 rst_tx_stats Reset TX Statistics
1: Reset all TX Stats counters
  • TX stats will stay in reset until reset is set back to 0
  • Reset also applies when snapshot or shadow is active, and will clear the AVMM visible registers
  • rst_tx_stats does not clear the parity error bit
RW 0x0